Multi purpose external door

Double-leaf multi purpose external steel door according to DIN EN 14351-1

labelled

U_D-value ≥ 1.2 W/(m²K) according to EN ISO 10077-1

Combinable with additional performance characteristics:

up to class 3 according to EN 12207 (± 600 Pa)

up to class C5 according to EN 12210 (± 2.000 Pa)

up to class 4A according to EN 12208 (± 150 Pa)

according to DIN EN 12211 (up to 3,800 Pa)

class 2 (d + e) according to EN 12219 (deflection)

according to DIN EN 14351-1
proven for doors in escape and rescue routes

flush-mounted design FLAT

according to DIN EN 50310, DIN VDE 0100-410 resp. DIN VDE 0100-540

up to IP44 according to DIN EN 60529
test report 44-1/26 PIV Velbert

Performance characteristics are combinable with further door types „System Schröders“:

EI₂90-S_a4 (Fire door System Schröders TSN-12 CE)
EI₂60-S_a4 (Fire door System Schröders TSN-4 CE)
EI₂30-S_a4 (Fire door System Schröders TSN-2 CE)

tested according to EN 1634-1

S₂₀₀ (smoke control door System Schröders RSN-2 CE)

tested according to EN 1634-3

up to class FB6 (e.g. bullet resistance door FBN-2)

tested according to EN 1522/1523 beim Beschussamt Ulm

up to RC4 (e.g. burglar resistance door System Schröders ESN-2)

according to DIN EN 1627 ff

up to R_W (C;C_tr) = 48 (-1;-5) dB (e.g. acoustic performance door System Schröders SN-2)

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717

no specifications
limitations on additional performance characteristics possible

• optional with fixed skylight / top panel

• optional with fixed side panel / side panels

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

• thin rebate
  • optional thick rebate

securing pins

seal depending on performance characteristics

• elastic rubber seal
• silicone seal

corner frame

• optional enclosing frame
• optional block frame

depending on performance characteristics

• without seal
• lowerable floor seal
• stop seal
• sliding seal / grinding seal

glass dimensions and -form variable

minimum frieze width: 90 mm

• optional with intermediate glass inset bars
• optional with port-hole
• optional in top panel

glass inset bars with concealed screw connection (for rectangular glazing)

2/3-part KO door hinges per leaf
with patented easy-running bearings as Easy-running doors
or with ball-Bearing spacer rings

• optional door hinge with 3D adjustment

various fittings possible

various locking systems possible

profile cylinder prepared (cylinder on-site)

both leafs with door closer according to DIN EN 1154
with door closing sequence control according to EN1158

• in masonry
• in concrete
• in aerated concrete
• in mounting walls
• in timber stud walls
• in steel frames / steel containers
• in facing walls

• optional blunt installation in soffit
• optional installation on the wall plate

according to DIN EN 14351-1 labelled

• additional security devices possible
  (magnetic contact, bolt contact, e-opener...)
• stainless steel design