Acoustic performance door

Double-leaf acoustic performance steel door or gate

• bis R_W (C;C_tr) = 48 (-1;-5) dB* measurement report820SST298 / 8000675260-1-11, TÜV Nord sealing system
  • 1 x frame seal with threshold profile 4-sided
  • 1 x rebate lip seal 3-sided
  • per doorleaf 1 x lowerable floor seal
• bis R_W (C;C_tr) = 47 (-1;-4) dB* measurement report820SST298 / 8000675260-1-10, TÜV Nord sealing system
  • 1 x rebate seal 3-sided
  • 1 x rebate lip seal 3-sided
  • per doorleaf 2 x lowerable floor seal
• bis R_W (C;C_tr) = 45 (-1;-3) dB* measurement report820SST298 / 8000675260-1-4, TÜV Nord sealing system
  • 1 x rebate seal 3-sided
  • per doorleaf 2 x lowerable floor seal
• bis R_W (C;C_tr) = 45 (0;-3) dB* measurement report820SST298 / 8000675260-1-13, TÜV Nord sealing system
  • 1 x frame seal with threshold profile 4-sided
• bis R_W (C;C_tr) = 43 (-1;-2) dB* measurement report820SST298 / 8000675260-1-6, TÜV Nord sealing system
  • 1 x rebate seal 3-sided
  • per doorleaf 1 x lowerable floor seal
• bis R_W (C;C_tr) = 39 (0;-1) dB* measurement report820SST298 / 8000675260-1-8, TÜV Nord sealing system
  • 1 x rebate seal 3-sided
  • per doorleaf 1 x sliding seal with run-on threshold
• mit Verglasung bis R_W (C;C_tr) = 45 (-1;-3) dB* measurement report820SST298 / 8000675260-2-2, TÜV Nord sealing system
  • 1 x rebate seal 3-sided
  • per doorleaf 2 x lowerable floor seal
• mit Verglasung bis R_W (C;C_tr) = 42 (-1;-2) dB* measurement report820SST298 / 8000675260-2-1, TÜV Nord sealing system
  • 1 x rebate seal 3-sided
  • per doorleaf 1 x lowerable floor seal

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717-1

* depending on dimensions see
Gutachtliche Beurteilung 820SST298-Hrd - TÜV Nord

Combinable with additional performance characteristics:

U_D-value ≥ 1.2 W/(m²K) according to EN ISO 10077-1

according to DIN EN 14351-1 labelled

up to class 3 according to EN 12207 (± 600 Pa)

up to class C5 according to EN 12210 (± 1.600 Pa)

up to class 4A according to EN 12208 (± 150 Pa)

according to DIN EN 12211 (up to 3,800 Pa)

class 2 (d + e) according to EN 12219 (deflection)

according to DIN EN 14351-1
proven for doors in escape and rescue routes

flush-mounted design FLAT

Performance characteristics are combinable with further door types „System Schröders“:

EI₂90-S_a4 (Fire door System Schröders TSN-12 CE)
EI₂60-S_a4 (Fire door System Schröders TSN-4 CE)
EI₂30-S_a4 (Fire door System Schröders TSN-2 CE)

tested according to EN 1634-1

S₂₀₀ (smoke control door System Schröders RSN-2 CE)

tested according to EN 1634-3

up to class FB6 (e.g. bullet resistance door FBN-2)

tested according to EN 1522/1523 beim Beschussamt Ulm

up to RC4 (e.g. burglar resistance door System Schröders ESN-2)

according to DIN EN 1627 ff

leaf thickness 69 mm - smooth double-walled
plate thickness 1.5 mm

• thin rebate
  • optional thick rebate

• insulating insert
  • optional full-face glued and pressed with cover plate,
    thus particularly smooth and even door leaf

securing pins

frame system "ZG"

corner frame

• optional enclosing frame
• optional block frame

see acoustic performance measurement reports

glass dimensions and -form variable

• acoustic performance glazing ≥ 44 dB

• optional with intermediate glass inset bars
• optional with port-hole

glass inset bars with concealed screw connection (for rectangular glazing)

2/3-part KO door hinges per leaf
with patented easy-running bearings as Easy-running doors
or with ball-Bearing spacer rings

• optional door hinge with 3D adjustment

• optional any approved handle set according to EN 1906 resp. EN 179
• optional panic bar handle or push bar according to EN 1125

active leaf
various locking systems possible
profile cylinder prepared (cylinder on-site)

fixed leaf
various locking systems possible

• optional panic locking according to EN 179 resp. EN 1125

both leafs with door closer according to DIN EN 1154
with door closing sequence control according to EN1158

wall according to acoustic performance requirements

• optional blunt installation in soffit
• optional installation on the wall plate

• additional security devices possible
  (magnetic contact, bolt contact, e-opener...)
• stainless steel design