Bullet resistance door

Single-leaf bullet resistance door according to EN 1522/1523

class FB6 - test report S-23-0208-04/05, Beschussamt Ulm
class FB4 - test report S-23-0208-01/02, Beschussamt Ulm

Combinable with additional performance characteristics:

U_D-value ≥ 1.3 W/(m²K) according to EN ISO 10077-1

RC4 - expert report No. 22-5/15.125, PIV-Velbert
RC3 - expert report No. 22-4/15.125, PIV-Velbert
RC2 - expert report No. 45-47/22.126, PIV-Velbert
RC1 - expert report No. 45-47/22.126, PIV-Velbert

according to DIN EN 1627 - 1630

up to R_W (C;C_tr) = 51 (-1;-5) dB

according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717

according to DIN EN 14351-1 labelled

up to class 4 according to EN 12207 (± 600 Pa)

up to class C5 according to EN 12210 (± 2.000 Pa)

up to class 8A according to EN 12208 (+ 450 Pa)

according to DIN EN 12211 (up to 5,000 Pa)

class 2 (d + e) according to EN 12219 (deflection)

according to DIN EN 14351-1
proven for doors in escape and rescue routes

flush-mounted design FLAT

Performance characteristics are combinable with further door types „System Schröders“:

EI₂30-S_a4 (fire door System Schröders TSN-1 CE)

tested according to EN 1634-1

S₂₀₀ (smoke control door System Schröders RSN-1 CE)

tested according to EN 1634-3

leaf thickness 69 mm - smooth double-walled
plate thickness 1.5 mm

• thin rebate
  • optional thick rebate

securing pins

seal depending on performance characteristics

• elastic rubber seal
• silicone seal

corner frame

• optional enclosing frame
• optional block frame

• optional with bullet-resistant threshold

Doors without a bullet-resistant threshold always represent a safety risk, as a projectile can pass through the lower door gap.

depending on performance characteristics

• without seal
• lowerable floor seal
• stop seal
• sliding seal / grinding seal

• FB4: bullet resistant rectangular glazing according to EN 1063 BR4-NS

glazing dimensions variable

minimum frieze width: 130 mm

glass inset bars with concealed screw connection

2/3-part KO door hinges
with patented easy-running bearings as Easy-running doors
or with ball-Bearing spacer rings

• optional door hinge with 3D adjustment

SLB heavy-duty hinges for door leaves from 400 kg

ES3 fittings

• optional visor fitting with 5-point locking system

various locking systems possible

profile cylinder prepared (cylinder on-site)

door closer according to DIN EN 1154

proven with mortared corner frame / attachment frame

• in statically suitable, bullet-resistant walls according to the corresponding bullet resistance class

• additional security devices possible
  (magnetic contact, bolt contact, e-opener...)
• stainless steel design
• bullet resistant door viewer up to FB6