Multi purpose ceiling access hatch

Single-leaf internal or external multipurpose ceiling steel flap

labelled

according to DIN ENV 14351-2

according to DIN EN 14351-1

Combinable with additional performance characteristics:

RC4 - expert report No. 22-5/15.125, PIV-Velbert
RC3 - expert report No. 22-4/15.125, PIV-Velbert
RC2 - expert report No. 45-47/22.126, PIV-Velbert
RC1 - expert report No. 45-47/22.126, PIV-Velbert

according to DIN EN 1627 ff

Bis R_W (C;C_tr) = 42 (-1;-3) dB*
according to EN ISO 10140-1 / EN ISO 10140-2 / EN ISO 717,

(Fire resistant ceiling access hatch T90 System Schröders THF)

measurement report81 16 48 52 29 -10, TÜV Nord

*Due to the permissible measurement range of the ceiling access hatch, the maximum sound insulation value of RW R_W (C;C_tr) = 45 (-1;-3) dB stated in the test report
is reduced by 3 dB to the above-mentioned value of RW R_W (C;C_tr) = 42 (-1;-3) dB.
See expert assessment SEII-16-0211-Hrd, TÜV Nord

U_D-value ≥ 1.3 W/(m²K) according to EN ISO 10077-1

up to class 4 according to EN 12207 (± 600 Pa)

up to class C5 according to EN 12210 (± 2.000 Pa)

Performance characteristics combinable with further ceiling access hatches „System Schröders“:

(Fire resistant ceiling access hatch T90 System Schröders THF)

(Fire resistant ceiling access hatch T90 System Schröders THF)

leaf thickness 68 mm to 69 mm - smooth double-walled
plate thickness 1.0 mm to 1.5 mm

• thin rebate design
  • optional thick rebate
  • insulating insert
    • optional full-face glued and pressed with cover plate,
      thus particularly smooth and even door leaf

seal depending on performance characteristics

• elastic rubber seal

corner frame

• optional enclosing frame
• optional block frame

concealed door hinges
thus smooth surface without tripping edge

no concealed hinges for burglar resistance with top attack side

top side: embedded folding ring shell
lower side: handle
various fittings possible

for burglar resistance with top-mounted lever handle ES1 on the attack side

single locking

• optional profile cylinder prepared (cylinder on-site)

• with grating cover made of steel or aluminium
• with chequered plate 3 mm made of steel or aluminium
• other designs for the top layer available on request

gas strut

• adjusted to the flap weight
• easy opening
• keeping open at an angle of approximately 90°
• prevents from falling shut uncontrollably and makes it easy to step through

• in concrete
• in aereated concrete
• in special ceilings
• optional flush installation

labelling and declaration of performance for external ceiling access hatches

• additional security devices possible
  (magnetic contact, bolt contact, e-opener...)
• stainless steel design
• further specifications available on request